Specification introduction of forging 7075 aluminum
forging 7075 aluminum is a cold-treated forging alloy with high strength, far better than mild steel. 7075 forged aluminum alloy is one of the most powerful alloys commercially available. The forging 7075 aluminum has a compact structure and strong corrosion resistance, which is best for aviation and marine plates. Common corrosion resistance, good mechanical properties and anode reaction. The fine grains make the deep drilling performance better and the tool wear resistance enhanced.
Alloy: 7075
Status: O, F, H112, T3, T4, T5, T6, T62, T652, T73, T74, T7452, T852, etc.
Forging shape: cylinder, round cake, cylinder, ring, etc.
Chemical composition of forging 7075 aluminum
Silicon Si: 0.40
Iron Fe: 0.50
Copper Cu: 1.2-2.0
Manganese Mn: 0.30
Magnesium Mg: 2.1-2.9
Chromium Cr: 0.18-0.28
Zinc Zn: 5.1-6.1
Titanium: 0.20
Aluminum Al: margin
Other: Single: 0.05 Total: 0.15
The applications of forging 7075 aluminum
forging 7075 aluminum can be used in aerospace, mold processing, mechanical equipment, tooling and fixtures, especially for the manufacture of aircraft structures and other high-stress structures that require high strength and strong corrosion resistance.
forging 7075 aluminum is a cold-treated forging alloy with high strength, far better than mild steel. 7075 forged aluminum alloy is one of the most powerful alloys commercially available. The forging 7075 aluminum has a compact structure and strong corrosion resistance, which is best for aviation and marine plates. Common corrosion resistance, good mechanical properties and anode reaction. The fine grains make the deep drilling performance better and the tool wear resistance enhanced.
Alloy: 7075
Status: O, F, H112, T3, T4, T5, T6, T62, T652, T73, T74, T7452, T852, etc.
Forging shape: cylinder, round cake, cylinder, ring, etc.
Chemical composition of forging 7075 aluminum
Silicon Si: 0.40
Iron Fe: 0.50
Copper Cu: 1.2-2.0
Manganese Mn: 0.30
Magnesium Mg: 2.1-2.9
Chromium Cr: 0.18-0.28
Zinc Zn: 5.1-6.1
Titanium: 0.20
Aluminum Al: margin
Other: Single: 0.05 Total: 0.15
The applications of forging 7075 aluminum
forging 7075 aluminum can be used in aerospace, mold processing, mechanical equipment, tooling and fixtures, especially for the manufacture of aircraft structures and other high-stress structures that require high strength and strong corrosion resistance.
