Specification of 2014 2218 2219 2618 2A02 2502 B50 2A70 5083 5456 6061 7075 free forging
Alloys: 2014, 2218, 2219, 2618, 2A02, 2A50, 2B50, 2A70, 5083, 5456, 6061, 7075
Status: T6, T652, T852, T61, T73, H111, H112
Starting Quantity: According to Agreement
Typical Applications: Aircraft Engine Compressor Wheel, Wind Guide Wheel, Forged Armor Plate, Complex Medium Strength Parts
Brief Introduction of 2014 2218 2219 2618 2A02 2502 B50 2083 5456 6061 7075 Free Forging
In 2014 2218 2219 2618 2A02 2502 B50 2502 B50 7083 5456 6061 7075 free forging is generally carried out between two flat dies or die without die cavity. The main difference between die forging and die forging is the complexity of die geometry. It can provide products of 7m length, 3.5m width, 800mm thickness and 4T weight. According to ISO 9001, AS9100 (civil aviation), PrEN9100 (aviation), GJB9001 (military standard), ISO/TSI6949 five quality system certification selection of supply. The cross-sectional area of free forgings of other alloys is 165,000 millimetres, except for the forgings of 2618 alloy with a cross-sectional area of 93,000 millimetres.
2014 2218 2219 2618 2A02 2502B50 2083 5456 6061 7075 Free Forging Process
Ingot - interruption of car skin - heating - pier rough punching - drilling, car center hole - heating - reaming - machining - quenching - straightening - aging - testing - Sampling - physical and chemical testing - Hardness testing - acceptance - packaging
Packaging Method of 2014 2218 2219 2618 2A02 2502 B50 2A70 5083 5456 6061 7075 Free Forging
1. Oil-coated packing box - suitable for small die forging and some large die forgings which are not machined on the surface by the demander.
2. Oil-free packing - suitable for all kinds of die forgings and free forgings whose weight is less than 50 kg.
3. Unpackaged parts - suitable for free forgings with a weight of not less than 50 kg.
Brief Introduction of the Equipment of 2014 2218 2219 2618 2A02 2502 B50 2A70 5083 5456 6061 7075 Free Forging
6000 tons free forging hydraulic press
The free forging has a single weight of 4T, a width of 2.5m, a length of 10m, a forged ring of 3.9m, and a diameter of Φ 700 × 40 × 2200.
10000 ton multidirectional die forging hydraulic press
The projection area of die forgings is 0.33(aluminium), the length is 2 m, the width is 1 m, and the height is 0.8 M.
30000 tons die forging hydraulic press
The projection area of die forgings is 2_ (aluminium), 1.2_ (titanium, steel), 9 m in length, 2.5 m in width and 1 m in height.
5 mm NC radial and axial ring rolling mill
Diameter 700-5000mm (height below 200mm) and height 80-800mm (height below 2500mm)
Alloys: 2014, 2218, 2219, 2618, 2A02, 2A50, 2B50, 2A70, 5083, 5456, 6061, 7075
Status: T6, T652, T852, T61, T73, H111, H112
Starting Quantity: According to Agreement
Typical Applications: Aircraft Engine Compressor Wheel, Wind Guide Wheel, Forged Armor Plate, Complex Medium Strength Parts
Brief Introduction of 2014 2218 2219 2618 2A02 2502 B50 2083 5456 6061 7075 Free Forging
In 2014 2218 2219 2618 2A02 2502 B50 2502 B50 7083 5456 6061 7075 free forging is generally carried out between two flat dies or die without die cavity. The main difference between die forging and die forging is the complexity of die geometry. It can provide products of 7m length, 3.5m width, 800mm thickness and 4T weight. According to ISO 9001, AS9100 (civil aviation), PrEN9100 (aviation), GJB9001 (military standard), ISO/TSI6949 five quality system certification selection of supply. The cross-sectional area of free forgings of other alloys is 165,000 millimetres, except for the forgings of 2618 alloy with a cross-sectional area of 93,000 millimetres.
2014 2218 2219 2618 2A02 2502B50 2083 5456 6061 7075 Free Forging Process
Ingot - interruption of car skin - heating - pier rough punching - drilling, car center hole - heating - reaming - machining - quenching - straightening - aging - testing - Sampling - physical and chemical testing - Hardness testing - acceptance - packaging
Packaging Method of 2014 2218 2219 2618 2A02 2502 B50 2A70 5083 5456 6061 7075 Free Forging
1. Oil-coated packing box - suitable for small die forging and some large die forgings which are not machined on the surface by the demander.
2. Oil-free packing - suitable for all kinds of die forgings and free forgings whose weight is less than 50 kg.
3. Unpackaged parts - suitable for free forgings with a weight of not less than 50 kg.
Brief Introduction of the Equipment of 2014 2218 2219 2618 2A02 2502 B50 2A70 5083 5456 6061 7075 Free Forging
6000 tons free forging hydraulic press
The free forging has a single weight of 4T, a width of 2.5m, a length of 10m, a forged ring of 3.9m, and a diameter of Φ 700 × 40 × 2200.
10000 ton multidirectional die forging hydraulic press
The projection area of die forgings is 0.33(aluminium), the length is 2 m, the width is 1 m, and the height is 0.8 M.
30000 tons die forging hydraulic press
The projection area of die forgings is 2_ (aluminium), 1.2_ (titanium, steel), 9 m in length, 2.5 m in width and 1 m in height.
5 mm NC radial and axial ring rolling mill
Diameter 700-5000mm (height below 200mm) and height 80-800mm (height below 2500mm)
